Finishing the levers
They sleep in a little "bed" with holes, mirroring the buttons, an easy way of keeping track of them, when the paper is gone. Now they are riveted onto the lever posts. Each rivet is a piece of straight 1.5 mm brass wire, sawed and filed down to the exact length. Four whacks per rivet, done.

Back on the ”sandwich”: the action board. Roy has made me two aluminum gizmos that now serve as marking tool for the pad outlines.

Finally the levers can be mounted and bent to roughly the right shape.


Right side levers ready for a small test –


Marking the pads’ outlines –


Levers in place, roughly bent into shape –

Next Previous